Home / Glossary
TV mount terms explained
Understand VESA, load rating, stud spacing, tilt, swivel and mounting terminology.
A
B
C
ceiling mount
A ceiling mount is hardware designed to attach a supported device or fixture to an overhead surface. Product pages may use the term alongside a mounting tube length or range.
Learn moreconcrete mount
A concrete mount is a mounting product or hardware intended for attaching equipment to a concrete surface. The term alone does not confirm fit, load capacity, or included anchors.
Learn moreD
E
F
fixed mount
A fixed mount holds a device or object in a set position rather than providing routine adjustment after installation. The label describes the mounting style, not its quality or compatibility.
Learn morefull-motion mount
A full-motion mount is a display mount designed to allow movement such as swiveling, tilting, or extending from the mounting surface. The exact range and supported movements vary by product.
Learn moreI
L
M
P
pan range
Pan range is the amount a mount can move side to side or around its vertical axis, shown by its stated angular limits. It describes movement, not smoothness, strength, or overall quality.
Learn moreprofile depth
Profile depth is the front-to-back distance a mount or mounting product occupies, usually measured from the mounting surface to the product’s outermost point. Check how the manufacturer defines the measurement.
Learn moreS
single-stud mount
A single-stud mount is designed to attach to one wall stud rather than spanning multiple studs. The label describes the mounting approach, not the mount’s overall strength or compatibility.
Learn moresoundbar mount
A soundbar mount is a bracket or support that attaches a soundbar to a wall, TV, or compatible mounting structure. Its fit depends on the mount’s design and the soundbar and display details listed on the product page.
Learn morespacer kit
A spacer kit contains pieces that create extra clearance between a mounted item and its mounting surface or hardware, helping accommodate recesses, obstructions, or fit differences.
Learn morestud spacing
Stud spacing is the center-to-center distance between wall studs. It helps determine whether a wall-mounted product can align with the available structural support.
Learn moreswivel
Swivel is the ability of a mount or mounted display to turn from side to side around a pivot. The listed swivel angle describes the movement range, but not how smoothly or securely it operates.
Learn moreT
table stand
A table stand is a support that lets a compatible display or device sit on a tabletop instead of being mounted to a wall or placed on the floor. Its exact fit and features depend on the product.
Learn moretilt mount
A tilt mount holds a display against a wall or other surface while allowing it to angle up or down. It is meant to adjust viewing angle without the movement of a full-motion mount.
Learn moretilt range
Tilt range is the amount a mount or bracket can angle a display up or down from its starting position. It is usually shown in degrees, but the stated figure may not explain direction, adjustment method, or clearance.
Learn moreTV size range
TV size range is the screen-size span a mount is advertised to support, usually measured by the TV’s diagonal size. It is a starting point, not a complete compatibility guarantee.
Learn moreU
V
W
wall plate
A wall plate is the part of a mounting system that attaches to the wall and connects to a bracket, arm, or other support. Its fit depends on the mount design, hole pattern, and installation requirements.
Learn morewood stud
A wood stud is a vertical structural framing member inside a wall. For mounting products, this label indicates that the product is intended to attach to wood framing, subject to its stated requirements.
Learn more