VESA 100x100 vs 200x200

VESA 100x100 and 200x200 are two different mounting-hole patterns. The numbers describe the horizontal and vertical distance between the centers of the TV’s mounting holes, measured in millimeters.

A single TV mount can support both patterns only when the mount’s verified specifications explicitly include 100x100 and 200x200. Do not assume that a mount fits both because the TV sizes appear similar or because the mounting plate has visible slots.

Check the exact TV and mount requirements first

Before comparing mounts, collect these details:

Requirement	What to verify
TV VESA pattern	100x100, 200x200, or another pattern, measured center-to-center
TV weight	Weight without the stand or feet
Mount rating	The mount’s maximum supported TV weight
Supported VESA range	Whether the mount lists your exact pattern
TV size range	Whether your TV falls within the stated size range
Mount type	Fixed, tilting, full-motion, or another design
Wall type	Wood studs, masonry, concrete, or another approved structure
Rear clearance	Recessed holes, spacers, ports, and cable bends
Installation position	Stud locations, viewing height, swivel range, and nearby obstructions

A mount must satisfy all applicable requirements, not just the VESA pattern.

VESA 100x100 vs 200x200: what the numbers mean

The first number is the horizontal hole spacing, and the second is the vertical spacing:

• VESA 100x100: 100 mm wide by 100 mm high
• VESA 200x200: 200 mm wide by 200 mm high

Measure from the center of one mounting hole to the center of the opposing hole. Measuring from the outside edges of the holes or from the edge of the TV will not give a reliable VESA measurement.

The difference is significant: a 200x200 pattern places the mounting points farther apart in both directions. A mount designed only for 100x100 should not be assumed to reach 200x200.

Can one mount support both patterns?

Yes, but only if one of the following is true:

1. The mount specifications list both VESA 100x100 and VESA 200x200.
2. The mount lists a VESA range that clearly includes both patterns, with no restrictions that exclude your TV.
3. The mount includes a manufacturer-approved adapter or mounting plate that is rated for your TV and pattern.

A mount’s advertised screen-size range does not prove that it supports both VESA patterns. Likewise, elongated slots do not establish a safe rating unless the manufacturer’s specifications confirm the supported pattern.

Verify the TV’s weight without its stand

Use the TV’s weight without the stand, feet, or base when comparing it with the mount’s weight rating.

A simple safety check is:

TV weight without stand <= mount’s maximum supported weight

For example, if a TV weighs 44 lb without its stand and the mount is rated for at least that weight, the weight requirement may be satisfied. You must still confirm the VESA pattern, TV size range, wall construction, and installation requirements.

Do not use the shipping weight. It includes packaging and may not represent the load applied to the mount.

Check the mount’s VESA range and size range separately

Mount specifications often list both a supported TV size range and a VESA range. These are different checks:

• VESA range: Determines whether the mounting holes physically align with the bracket.
• TV size range: Indicates the screen sizes the mount is designed to accommodate.
• Weight rating: Determines whether the mount can safely support the TV’s mass.

A TV can fall within a mount’s advertised size range but still have an unsupported VESA pattern. Conversely, a VESA pattern can align while the TV exceeds the mount’s weight rating.

For a 100x100 or 200x200 TV, confirm that the exact pattern is supported rather than relying on a general statement such as “fits most TVs.”

Account for recessed holes and spacers

Some TVs have mounting holes recessed below the rear housing. Others have an uneven rear panel, a raised area around the holes, or a curved enclosure.

These conditions can affect how the mounting arms or plate sit against the TV:

• A recessed hole may require correctly sized spacers.
• A spacer can change the screw engagement depth and the distance between the TV and the wall.
• A thick mounting plate may need additional clearance around the rear housing.
• The bracket must sit securely without rocking or forcing the TV panel.

Use only the screws, spacers, and washers specified or approved for the TV and mount. The screw must engage securely without being so long that it contacts internal components. If the supplied hardware does not match the TV’s threaded holes, stop and confirm the correct hardware rather than guessing.

Check ports and cable clearance

A mount that fits the VESA pattern can still be a poor installation fit if it blocks ports or leaves too little room for cables.

Inspect the TV’s rear and side connections, including:

• HDMI and USB ports
• Power connection
• Optical, Ethernet, antenna, and audio connections
• Cable exits that point straight backward
• Cable bends required by the mount’s final position

Fixed mounts usually place the TV closer to the wall, so rear-facing plugs may need more clearance than the mount provides. Tilting and full-motion mounts may create additional space in some positions, but cable clearance must be checked throughout the intended range of movement.

Do not force cables into sharp bends or allow connectors to press against the wall. If a cable requires more space than the installed mount provides, choose a suitable cable arrangement or a mount with adequate clearance.

Consider the mount type and movement

The VESA pattern does not determine whether a fixed, tilting, or full-motion mount is appropriate.

Fixed mounts

A fixed mount may provide the smallest wall gap, which can create stricter requirements for rear ports, recessed holes, and cable bends. It is generally suited to a viewing position that does not need regular adjustment.

Tilting mounts

A tilting mount can help reduce glare or accommodate a higher installation position. Check whether the TV, wall, or nearby trim limits the available tilt angle.

Full-motion mounts

A full-motion mount must support the TV through the intended extension, swivel, and tilt positions. Confirm that the mount’s rating and installation instructions cover the TV’s weight and the required movement. Also check for nearby walls, cabinets, windows, and cable slack that could restrict movement.

A mount that supports both 100x100 and 200x200 is not automatically suitable for every installation position. Movement, clearance, and wall attachment remain separate decisions.

Confirm the wall and mounting location

The wall must be capable of supporting the mount and TV through the intended installation. The correct attachment method depends on the wall structure.

Before drilling, identify:

• Wood-stud locations and spacing
• Concrete or masonry condition
• Any metal framing or other wall construction
• Electrical wiring and plumbing that may be behind the wall
• The location of the mount’s required holes
• Whether the mount can attach as specified by its installation instructions

Do not substitute an unverified fastener or anchor because the provided hardware does not align with the wall. If the mount requires attachment to structural members, do not rely on drywall alone.

The mount should be installed level and firmly attached. If the available stud positions or masonry layout do not work with the mount’s approved hole pattern, choose a compatible mounting solution rather than improvising.

Choose mounting height after checking the room

VESA compatibility determines whether the TV can attach to the mount. It does not determine the best height.

Plan the height around:

• Primary seated eye level
• Viewing distance
• Furniture below the TV
• Soundbar or other equipment
• Glare from windows and lights
• Required tilt or swivel
• Cable routing and outlet position

A higher installation may make tilt useful, while a centered, eye-level installation may not need movement. Leave enough space to connect cables and access controls without placing stress on the TV or mount.

Compatibility checklist for VESA 100x100 and 200x200

Use this checklist before purchasing or installing:

• [ ] The TV’s VESA pattern was measured center-to-center.
• [ ] The TV is confirmed as 100x100 or 200x200, rather than a similar-looking pattern.
• [ ] The TV weight was checked without the stand or feet.
• [ ] The mount’s maximum weight rating meets or exceeds the TV’s weight.
• [ ] The mount specifications explicitly include the TV’s VESA pattern.
• [ ] If one mount is intended for both patterns, its specifications explicitly list both 100x100 and 200x200.
• [ ] The TV falls within the mount’s supported size range.
• [ ] Recessed holes, curved surfaces, or rear obstructions have been checked.
• [ ] The supplied or approved spacers and screws match the TV’s threaded holes.
• [ ] Rear ports and cable bends have enough clearance.
• [ ] The selected fixed, tilting, or full-motion design suits the room.
• [ ] The wall type and structural attachment points match the mount’s instructions.
• [ ] The planned height, tilt, swivel, and cable route have been checked.
• [ ] The mount will be installed level and secured using the approved hardware.

If the mount’s specifications do not clearly confirm support for both VESA patterns, treat compatibility as unverified. Once the requirements are clear, Browse TV mounts to compare suitable mounting options.